[2022 New Products]

2022 New product information

B-89-LAK Beaker KUN

A series of products that makes beaker experiments convenient by putting it on your beaker. The distance between the anode/cathode can be changed smoothly while keeping the cathode and anode parallel. Until now, we have prepared for 500ml, 1L, and 2L beakers, but this time we have made a size that can be used for 200ml beakers and 3L beakers.
>> Product details

A-49B multi-filter 1B type

The multi-filter has been beloved for many years, but we have made a model change this time. Compared to existing products, all wetted parts other than screws are replaced with heat-resistant PVC resin to improve chemical resistance and can also be used for chromium plating. In addition, the input voltage has been changed from AC100V to DC24V to improve safety.
>> Product details

B-73-1000 Mini Barrel 1000 (1L-Type)

A horizontal barrel equipment with a larger drum capacity than existing products. Since its main material is PP resin, it can be used up to a processing temperature of about 90 ° C, and a sample volume of about 1 L can be processed at one time. A dedicated controller with a built-in breaker is included.

>> Product details

  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top